70
Figure 26 Adding an access user account
Configuring the portal server
In this section, the RADIUS server runs on IMC PLAT 5.0 (E0101H03) and IMC UAM 5.0 SP1
(E0101P03).
1. Configure the portal server:
a. Click the Service tab.
b. From the navigation tree, select User Access Manager > Portal Service Management >
Server.
c. Enter the URL address of the portal authentication main page, in the format
http://ip:port/portal, where ip and port are those configured during IMC UAM installation.
Usually, the default port 8080 is used.
d. Leave the default settings for other parameters and click OK.
Figure 27 Portal server configuration
2. Configure an IP address group:
a. From the navigation tree, select User Access Manager > Portal Service Management >
IP Group.
b. Click Add to configure an IP address group as follows:
− Enter the name Portal_user.
To Next Page
Loading...
