73
# Create an ISP domain named dm1 and enter its view.
[Router] domain dm1
# Configure the ISP domain to use RADIUS scheme rs1.
[Router-isp-dm1] authentication portal radius-scheme rs1
[Router-isp-dm1] authorization portal radius-scheme rs1
[Router-isp-dm1] accounting portal radius-scheme rs1
[Router-isp-dm1] quit
# Configure dm1 as the default ISP domain for all users. Then, if a user enters a username without
any ISP domain at login, the authentication and accounting methods of the default domain will be
used for the user.
[Router] domain default enable dm1
Configure portal authentication:
# Configure the portal server.
[Router] portal server newpt ip 10.1.1.1 key portal port 50100 url
http://10.1.1.1:8080/portal
# Enable portal authentication on the interface connecting the host.
[Router] interface ethernet 1/1
[Router-Ethernet1/1] portal server newpt method direct
[Router-Ethernet1/1] quit
Verifying the configuration
The user can initiate portal authentication by using the HPE iNode client or by accessing a Web page.
All the initiated Web requests will be redirected to the portal authentication page at
http://10.1.1.1:8080/portal. Before passing portal authentication, the user can access only the
authentication page. After passing portal authentication, the user can access the Internet.
# After the user passes portal authentication, view the portal user information on the router.
[Router] display portal user interface ethernet 1/1
Index:19
State:ONLINE
SubState:NONE
ACL:NONE
Work-mode:stand-alone
MAC IP Vlan Interface
---------------------------------------------------------------------
0015-e9a6-7cfe 192.168.1.58 0 Ethernet1/1
On interface Ethernet1/1:total 1 user(s) matched, 1 listed.
# View the connection information on the router.
[Router] display connection
Index=20 ,Username=portal@dm1
MAC=00-15-E9-A6-7C-FE
IP=192.168.1.58
IPv6=N/A
Total 1 connection(s) matched.
To Next Page
Loading...
Need help?
General
