HPE FlexNetwork MSR Series Comware 5 Security Configuration Guide

72
− Enter the port group name.
− Select an IP address group you just configured from the IP Group list.
c. Leave the default settings for other parameters and click OK.
Figure 30 Device list
Figure 31 Associating the portal device with IP address group
5. From the navigation tree, select User Access Manager > Service Parameters > Validate
System Configuration to validate the configurations.
Configuring the router
# Create a RADIUS scheme named rs1 and enter its view.
<Router> system-view
[Router] radius scheme rs1
# Set the server type for the RADIUS scheme. When using CAMS or IMC, set the server type to
extended.
[Router-radius-rs1] server-type extended
# Specify the primary authentication server and primary accounting server, and configure the keys
for communication with the servers.
[Router-radius-rs1] primary authentication 10.1.1.1
[Router-radius-rs1] primary accounting 10.1.1.1
[Router-radius-rs1] key authentication expert
[Router-radius-rs1] key accounting expert
# Include the domain names in usernames sent to the RADIUS server.
[Router-radius-rs1] user-name-format with-domain
[Router-radius-rs1] quit
Configure an authentication domain:

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English