Huawei quidway s7700

To Next Page

To Previous Page

[SwitchA] interface gigabitethernet 1/0/1

[SwitchA-GigabitEthernet1/0/1] port link-type trunk

[SwitchA-GigabitEthernet1/0/1] port trunk allow-pass vlan 10

[SwitchA-GigabitEthernet1/0/1] quit

[SwitchA] interface gigabitethernet 1/0/2

[SwitchA-GigabitEthernet1/0/2] port link-type trunk

[SwitchA-GigabitEthernet1/0/2] port trunk allow-pass vlan 30

[SwitchA-GigabitEthernet1/0/2] quit

# Assign IP addresses to VLANIF interfaces.

[SwitchA] interface vlanif 10

[SwitchA-Vlanif10] ip address 10.10.10.1 24

[SwitchA-Vlanif10] quit

[SwitchA] interface vlanif 30

[SwitchA-Vlanif30] ip address 30.30.30.1 24

[SwitchA-Vlanif30] quit

# Configure basic OSPF functions.

[SwitchA] router id 1.1.1.1

[SwitchA] ospf

[SwitchA-ospf-1] area 0

[SwitchA-ospf-1-area-0.0.0.0] network 10.10.10.0 0.0.0.255

[SwitchA-ospf-1-area-0.0.0.0] network 30.30.30.0 0.0.0.255

[SwitchA-ospf-1-area-0.0.0.0] quit

Step 2 Configure Switch B.

# Create VLANs.

<Quidway> system-view

[Quidway] sysname SwitchB

[SwitchB] vlan batch 10 30

# Add interfaces to VLANs.

[SwitchB] interface gigabitethernet 1/0/2

[SwitchB-GigabitEthernet1/0/2] port link-type trunk

[SwitchB-GigabitEthernet1/0/2] port trunk allow-pass vlan 10

[SwitchB-GigabitEthernet1/0/2] quit

[SwitchB] interface gigabitethernet 1/0/1

[SwitchB-GigabitEthernet1/0/1] port link-type trunk

[SwitchB-GigabitEthernet1/0/1] port trunk allow-pass vlan 30

[SwitchB-GigabitEthernet1/0/1] quit

# Assign IP addresses to VLANIF interfaces.

[SwitchB] interface vlanif 10

[SwitchB-Vlanif10] ip address 20.20.20.1 24

[SwitchB-Vlanif10] quit

[SwitchB] interface vlanif 30

[SwitchB-Vlanif30] ip address 30.30.30.2 24

[SwitchB-Vlanif30] quit

# Configure basic OSPF functions.

[SwitchB] router id 2.2.2.2

[SwitchB] ospf

[SwitchB-ospf-1] area 0

[SwitchB-ospf-1-area-0.0.0.0] network 20.20.20.0 0.0.0.255

[SwitchB-ospf-1-area-0.0.0.0] network 30.30.30.0 0.0.0.255

[SwitchB-ospf-1-area-0.0.0.0] quit

Step 3 Verify the configuration.

On the computer on the Layer 2 network connected to Switch A, set the default gateway address

to the IP address of VLANIF 10, that is, 10.10.10.1/24.

Quidway S7700 Smart Routing Switch

Configuration Guide - Ethernet 3 VLAN Configuration

Issue 01 (2011-07-15) Huawei Proprietary and Confidential

133

Main Page

Huawei quidway s7700 - Page 150

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals