Huawei quidway s7700 - Page 160

3. Configure the IP address for the super-VLAN.
4. Configure proxy ARP for the super-VLAN.
Data Preparation
To complete the configuration, you need the following data:
l GE 1/0/0 and GE 2/0/0 belong to VLAN 2.
l GE 3/0/0 and GE 4/0/0 belong to VLAN 3.
l The VLAN ID of the super-VLAN is 4.
l The IP address of the super-VLAN is 100.1.1.12.
Procedure
Step 1 Set the interface type.
# Configure GE 1/0/0 as an access interface.
<Quidway> system-view
[Quidway] interface gigabitethernet 1/0/0
[Quidway-GigabitEthernet1/0/0] port link-type access
[Quidway-GigabitEthernet1/0/0] quit
# Configure GE 2/0/0 as an access interface.
<Quidway> system-view
[Quidway] interface gigabitethernet 2/0/0
[Quidway-GigabitEthernet2/0/0] port link-type access
[Quidway-GigabitEthernet2/0/0] quit
# Configure GE 3/0/0 as an access interface.
<Quidway> system-view
[Quidway] interface gigabitethernet 3/0/0
[Quidway-GigabitEthernet3/0/0] port link-type access
[Quidway-GigabitEthernet3/0/0] quit
# Configure GE 4/0/0 as an access interface.
<Quidway> system-view
[Quidway] interface gigabitethernet 4/0/0
[Quidway-GigabitEthernet4/0/0] port link-type access
[Quidway-GigabitEthernet4/0/0] quit
Step 2 Configure VLAN 2.
# Create VLAN 2.
[Quidway] vlan 2
# Add GE 1/0/0 and GE 2/0/0 to VLAN 2.
[Quidway-vlan2] port gigabitethernet 1/0/0 2/0/0
[Quidway-vlan2] quit
Step 3 Configure VLAN 3.
# Create VLAN 3.
[Quidway] vlan 3
# Add GE 3/0/0 and GE 4/0/0 to VLAN 3.
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 3 VLAN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
143