Huawei quidway s7700 - Page 172

Procedure
Step 1 Configure the Switch.
# Create VLANs.
<Quidway> system-view
[Quidway] vlan batch 10 20
# Enable VLAN transparent transmission.
[Quidway] vlan 20
[Quidway-vlan20] protocol-transparent
# Add interfaces to the VLANs.
[Quidway] interface gigabitethernet 1/0/1
[Quidway-GigabitEthernet1/0/1] port hybrid tagged vlan 10
[Quidway-GigabitEthernet1/0/1] quit
[Quidway] interface gigabitethernet 1/0/2
[Quidway-GigabitEthernet1/0/2] port hybrid tagged vlan 10 20
[Quidway-GigabitEthernet1/0/2] quit
[Quidway] interface gigabitethernet 1/0/3
[Quidway-GigabitEthernet1/0/3] port hybrid tagged vlan 20
[Quidway-GigabitEthernet1/0/3] quit
Step 2 Configure SwitchA.
# Create VLANs.
<Quidway> system-view
[Quidway] vlan batch 10
# Add interfaces to the VLANs.
[Quidway] interface gigabitethernet 0/0/1
[Quidway-GigabitEthernet0/0/1] port hybrid tagged vlan 10
[Quidway-GigabitEthernet0/0/1] quit
[Quidway] interface ethernet 0/0/1
[Quidway-Ethernet0/0/1] port hybrid pvid vlan 10
[Quidway-Ethernet0/0/1] port hybrid untagged vlan 10
[Quidway-Ethernet0/0/1] quit
[Quidway] interface ethernet 0/0/2
[Quidway-Ethernet0/0/2] port hybrid pvid vlan 10
[Quidway-Ethernet0/0/2] port hybrid untagged vlan 10
[Quidway-Ethernet0/0/2] quit
Step 3 Configure SwitchB.
# Create VLANs.
<Quidway> system-view
[Quidway] vlan batch 20
# Add interfaces to the VLANs.
[Quidway] interface gigabitethernet 0/0/1
[Quidway-GigabitEthernet0/0/1] port hybrid tagged vlan 20
[Quidway-GigabitEthernet0/0/1] quit
[Quidway] interface ethernet 0/0/1
[Quidway-Ethernet0/0/1] port hybrid pvid vlan 20
[Quidway-Ethernet0/0/1] port hybrid untagged vlan 20
[Quidway-Ethernet0/0/1] quit
[Quidway] interface ethernet 0/0/2
[Quidway-Ethernet0/0/1] port hybrid pvid vlan 20
[Quidway-Ethernet0/0/2] port hybrid untagged vlan 20
[Quidway-Ethernet0/0/2] quit
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 3 VLAN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
155