Huawei quidway s7700 - Page 173

Step 4 Verify the configuration.
After the configuration, run the display this command in the view of VLAN 20, and you can
check whether VLAN transparent transmission is enabled.
[Quidway-Vlan20] display this
#
vlan 20
protocol-transparent
#
return
----End
Configuration Files
Configuration file of the Switch
#
sysname Quidway
#
vlan batch 10 20
#
vlan 20
protocol-transparent
#
interface GigabitEthernet1/0/1
port hybrid tagged vlan 10
#
interface GigabitEthernet1/0/2
port hybrid tagged vlan 10 20
#
interface GigabitEthernet1/0/3
port hybrid tagged vlan 20
#
return
Configuration file of SwitchA
#
sysname Quidway
#
vlan batch 10
#
interface Ethernet0/0/1
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface Ethernet0/0/2
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface GigabitEthernet0/0/1
port hybrid tagged vlan 10
#
return
Configuration file of Switch B
#
sysname Quidway
#
vlan batch 20
#
interface Ethernet0/0/1
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 3 VLAN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
156