<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] vlan 5
# Create VLAN 10 on SwitchC.
<Quidway> system-view
[Quidway] sysname SwitchC
[SwitchC] vlan 10
# Create VLAN 10 on SwitchD.
<Quidway> system-view
[Quidway] sysname SwitchD
[SwitchD] vlan 10
Step 2 Add interfaces to VLANs.
# Add GE 3/0/1 and GE 3/0/2 of SwitchA to VLAN 6.
[SwitchA] interface gigabitethernet 3/0/1
[SwitchA-GigabitEthernet3/0/1] port link-type trunk
[SwitchA-GigabitEthernet3/0/1] port trunk allow-pass vlan 6
[SwitchA-GigabitEthernet3/0/1] quit
[SwitchA] interface gigabitethernet 3/0/2
[SwitchA-GigabitEthernet3/0/2] port link-type trunk
[SwitchA-GigabitEthernet3/0/2] port trunk allow-pass vlan 6
[SwitchA-GigabitEthernet3/0/2] quit
# Add GE 1/0/1 of SwitchA to VLAN 6.
[SwitchA] interface gigabitethernet 1/0/1
[SwitchA-GigabitEthernet1/0/1] port link-type trunk
[SwitchA-GigabitEthernet1/0/1] port trunk allow-pass vlan 6
[SwitchA-GigabitEthernet1/0/1] quit
# Add GE 3/0/1 and GE 3/0/2 of SwitchB to VLAN 5.
[SwitchB] interface gigabitethernet 3/0/1
[SwitchB-GigabitEthernet3/0/1] port link-type trunk
[SwitchB-GigabitEthernet3/0/1] port trunk allow-pass vlan 5
[SwitchB-GigabitEthernet3/0/1] quit
[SwitchB] interface gigabitethernet 3/0/2
[SwitchB-GigabitEthernet3/0/2] port link-type trunk
[SwitchB-GigabitEthernet3/0/2] port trunk allow-pass vlan 5
[SwitchB-GigabitEthernet3/0/2] quit
# Add GE 2/0/2 of SwitchB to VLAN 5.
[SwitchB] interface gigabitethernet 2/0/2
[SwitchB-GigabitEthernet2/0/2] port link-type trunk
[SwitchB-GigabitEthernet2/0/2] port trunk allow-pass vlan 5
[SwitchB-GigabitEthernet2/0/2] quit
# Add GE 1/0/1 of SwitchC to VLAN 10.
[SwitchC] interface gigabitethernet 1/0/1
[SwitchC-GigabitEthernet1/0/1] port link-type trunk
[SwitchC-GigabitEthernet1/0/1] port trunk allow-pass vlan 10
[SwitchC-GigabitEthernet1/0/1] quit
# Add GE 1/0/1 of SwitchD to VLAN 10.
[SwitchD] interface gigabitethernet 1/0/1
[SwitchD-GigabitEthernet1/0/1] port link-type trunk
[SwitchD-GigabitEthernet1/0/1] port trunk allow-pass vlan 10
[SwitchD-GigabitEthernet1/0/1] quit
Step 3 Configure VLAN mapping of single tag on the Switches.
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 4 VLAN Mapping Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
176
To Next Page
Loading...
