Huawei quidway s7700 - Page 273

PW template name : --
primary or secondary : primary
VC tunnel/token info : 1 tunnels/tokens
NO.0 TNL type : lsp , TNL ID : 0x10007
create time : 0 days, 0 hours, 4 minutes, 19 seconds
up time : 0 days, 0 hours, 3 minutes, 45 seconds
last change time : 0 days, 0 hours, 3 minutes, 45 seconds
CE1 and CE2 can ping each other successfully.
Take the display on CE1 as an example.
<CE1> ping 100.1.1.2
PING 100.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=31 ms
Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=10 ms
Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=5 ms
Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=2 ms
Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=28 ms
--- 100.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 2/15/31 ms
----End
Configuration Files
l Configuration file of CE1
#
sysname CE1
#
vlan batch 10
#
interface Vlanif10
ip address 100.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 10
#
return
l Configuration file of Switch1
#
sysname Switch1
#
vlan batch 100
#
interface GigabitEthernet2/0/0
port hybrid tagged vlan 100
#
interface GigabitEthernet1/0/0
port hybrid untagged vlan 100
port vlan-stacking vlan 10 stack-vlan 100
#
return
l Configuration file of PE1
#
sysname PE1
#
vlan batch 20
#
mpls lsr-id 1.1.1.9
mpls
#
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 5 QinQ Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
256