<Quidway> system-view
[Quidway] sysname PE4
[PE4] rrpp domain 1
[PE4-rrpp-domain-region1] control-vlan 100
[PE4-rrpp-domain-region1] protected-vlan reference-instance all
2. Create a VLAN and add interfaces on the ring network to the VLAN.
# Create VLAN 100 on PE1, and then add GE 1/0/1, GE 1/0/2, and GE 1/0/3 to VLAN
100.
[PE1] vlan 100
[PE1-vlan100] quit
[PE1] interface gigabitethernet 1/0/1
[PE1-GigabitEthernet1/0/1] stp disable
[PE1-GigabitEthernet1/0/1] port link-type trunk
[PE1-GigabitEthernet1/0/1] port trunk allow-pass vlan 100
[PE1-GigabitEthernet1/0/1] quit
[PE1] interface gigabitethernet 1/0/2
[PE1-GigabitEthernet1/0/2] stp disable
[PE1-GigabitEthernet1/0/2] port link-type trunk
[PE1-GigabitEthernet1/0/2] port trunk allow-pass vlan 100
[PE1-GigabitEthernet1/0/2] quit
[PE1] interface gigabitethernet 1/0/3
[PE1-GigabitEthernet1/0/3] stp disable
[PE1-GigabitEthernet1/0/3] port link-type trunk
[PE1-GigabitEthernet1/0/3] port trunk allow-pass vlan 100
[PE1-GigabitEthernet1/0/3] quit
# Create VLAN 100 on PE2, and then add GE 1/0/1, GE 1/0/2, and GE 1/0/3 to VLAN
100.
[PE2] vlan 100
[PE2-vlan100] quit
[PE2] interface gigabitethernet 1/0/1
[PE2-GigabitEthernet1/0/1] stp disable
[PE2-GigabitEthernet1/0/1] port link-type trunk
[PE2-GigabitEthernet1/0/1] port trunk allow-pass vlan 100
[PE2-GigabitEthernet1/0/1] quit
[PE2] interface gigabitethernet 1/0/2
[PE2-GigabitEthernet1/0/2] stp disable
[PE2-GigabitEthernet1/0/2] port link-type trunk
[PE2-GigabitEthernet1/0/2] port trunk allow-pass vlan 100
[PE2-GigabitEthernet1/0/2] quit
[PE2] interface gigabitethernet 1/0/3
[PE2-GigabitEthernet1/0/3] stp disable
[PE2-GigabitEthernet1/0/3] port link-type trunk
[PE2-GigabitEthernet1/0/3] port trunk allow-pass vlan 100
[PE2-GigabitEthernet1/0/3] quit
# Create VLAN 100 on PE3, and then add GE 1/0/1 and GE 1/0/2 to VLAN 100.
[PE3] vlan 100
[PE3-vlan100] quit
[PE3] interface gigabitethernet 1/0/1
[PE3-GigabitEthernet1/0/1] stp disable
[PE3-GigabitEthernet1/0/1] port link-type trunk
[PE3-GigabitEthernet1/0/1] port trunk allow-pass vlan 100
[PE3-GigabitEthernet1/0/1] quit
[PE3] interface gigabitethernet 1/0/2
[PE3-GigabitEthernet1/0/2] stp disable
[PE3-GigabitEthernet1/0/2] port link-type trunk
[PE3-GigabitEthernet1/0/2] port trunk allow-pass vlan 100
[PE3-GigabitEthernet1/0/2] quit
# Create VLAN 100 on PE4, and then add GE 1/0/1 and GE 1/0/2 to VLAN 100.
[PE4] vlan 100
[PE4-vlan100] quit
[PE4] interface gigabitethernet 1/0/1
[PE4-GigabitEthernet1/0/1] stp disable
[PE4-GigabitEthernet1/0/1] port link-type trunk
[PE4-GigabitEthernet1/0/1] port trunk allow-pass vlan 100
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 10 SEP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
555
To Next Page
Loading...
