Huawei quidway s7700 - Page 573

[PE4-GigabitEthernet1/0/1] quit
[PE4] interface gigabitethernet 1/0/2
[PE4-GigabitEthernet1/0/2] stp disable
[PE4-GigabitEthernet1/0/2] port link-type trunk
[PE4-GigabitEthernet1/0/2] port trunk allow-pass vlan 100
[PE4-GigabitEthernet1/0/2] quit
3. Configure PE1 as the master node and PE2 to PE4 as the transmit node of the major ring,
and configure the primary interface and secondary interface of the nodes.
# Configure PE1.
[PE1] rrpp domain 1
[PE1-rrpp-domain-region1] ring 1 node-mode master primary-port
gigabitEthernet1/0/2 secondary-port gigabitEthernet1/0/3 level 0
[PE1-rrpp-domain-region1] ring 1 enable
# Configure PE2.
[PE2] rrpp domain 1
[PE2-rrpp-domain-region1] ring 1 node-mode transit primary-port
gigabitEthernet1/0/2 secondary-port gigabitEthernet1/0/3 level 0
[PE2-rrpp-domain-region1] ring 1 enable
# Configure PE3.
[PE3] rrpp domain 1
[PE3-rrpp-domain-region1] ring 1 node-mode transit primary-port
gigabitEthernet1/0/1 secondary-port gigabitEthernet1/0/2 level 0
[PE3-rrpp-domain-region1] ring 1 enable
# Configure PE4.
[PE4] rrpp domain 1
[PE4-rrpp-domain-region1] ring 1 node-mode transit primary-port
gigabitEthernet1/0/1 secondary-port gigabitEthernet1/0/2 level 0
[PE4-rrpp-domain-region1] ring 1 enable
4. Enable RRPP.
# Configure PE1.
[PE1] rrpp enable
# Configure PE2.
[PE2] rrpp enable
# Configure PE3.
[PE3] rrpp enable
# Configure PE4.
[PE4] rrpp enable
After completing the preceding configurations, run the display rrpp brief or display rrpp
verbose domain command on PE1 to check the RRPP configuration.
[PE1] display rrpp brief
Abbreviations for Switch Node Mode :
M - Master , T - Transit , E - Edge , A - Assistant-Edge
RRPP Protocol Status: Enable
RRPP Working Mode: HW
RRPP Linkup Delay Timer: 0 sec (0 sec default)
Number of RRPP Domains: 1
Domain Index : 1
Control VLAN : major 5 sub 6
Protected VLAN : Reference Instance 1
Hello Timer : 1 sec(default is 1 sec) Fail Timer : 6 sec(default is 6 sec)
Ring Ring Node Primary/Common Secondary/Edge Is
ID Level Mode Port Port Enabled
----------------------------------------------------------------------------
1 0 M GigabitEthernet1/0/2 GigabitEthernet1/0/3 Yes
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 10 SEP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
556