EasyManua.ls Logo

Huawei quidway s7700 - Page 617

Huawei quidway s7700
648 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Port Protocol :enabled
Port Role :Designated Port
Port Priority :128
Port Cost(Dot1T ) :Config=auto / Active=200000000
Desg. Bridge/Port :32768.000b-09d4-b66c / 128.82
Port Edged :Config=disabled / Active=disabled
Point-to-point :Config=auto / Active=true
Transit Limit :147 packets/hello-time
Protection Type :None
Port Stp Mode :MSTP
Port Protocol Type :Config=auto / Active= dot1s
BPDU Encapsulation :Config=stp / Active=stp
PortTimes :Hello 2s MaxAge 20s FwDly 15s RemHop 20
TC or TCN send :0
TC or TCN received :0
BPDU Sent :7095
TCN: 0, Config: 0, RST: 0, MST: 7095
BPDU Received :2
TCN: 0, Config: 0, RST: 0, MST: 2
Run the display stp command on CE3 and CE4 to view the root in the MST region. You can
find that a spanning tree is calculated between CE3 and CE4. GE 1/0/0 of CE3 is a root port,
and CE 1/0/0 of CE4 is a designated port.
<CE3> display stp
-------[CIST Global Info][Mode MSTP]-------
CIST Bridge :32768.00e0-fc9f-3257
Bridge Times :Hello 2s MaxAge 20s FwDly 15s MaxHop 20
CIST Root/ERPC :32768.00e0-fc9a-4315 / 199999
CIST RegRoot/IRPC :32768.00e0-fc9f-3257 / 0
CIST RootPortId :128.82
BPDU-Protection :disabled
TC or TCN received :4
TC count per hello :4
STP Converge Mode :Normal
Time since last TC received :0 days 3h:57m:0s
----[Port17(GigabitEthernet1/0/0)][FORWARDING]----
Port Protocol :enabled
Port Role :Root Port
Port Priority :128
Port Cost(Dot1T ) :Config=auto / Active=200000000
Desg. Bridge/Port :32768.00e0-fc9a-4315 / 128.82
Port Edged :Config=disabled / Active=disabled
Point-to-point :Config=auto / Active=true
Transit Limit :147 packets/hello-time
Protection Type :None
Port Stp Mode :MSTP
Port Protocol Type :Config=auto / Active= dot1s
BPDU Encapsulation :Config=stp / Active=stp
PortTimes :Hello 2s MaxAge 20s FwDly 15s RemHop 20
TC or TCN send :0
TC or TCN received :0
BPDU Sent :238
TCN: 0, Config: 0, RST: 0, MST: 238
BPDU Received :9745
TCN: 0, Config: 0, RST: 0, MST: 9745
<CE4> display stp
-------[CIST Global Info][Mode MSTP]-------
CIST Bridge :32768.00e0-fc9a-4315
Bridge Times :Hello 2s MaxAge 20s FwDly 15s MaxHop 20
CIST Root/ERPC :32768.00e0-fc9a-4315 / 0
CIST RegRoot/IRPC :32768.00e0-fc9a-4315 / 0
CIST RootPortId :0.0
BPDU-Protection :disabled
TC or TCN received :2
TC count per hello :2
STP Converge Mode :Normal
Time since last TC received :0 days 5h:33m:17s
----[Port17(GigabitEthernet1/0/0)][FORWARDING]----
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 11 Layer 2 Protocol Transparent Transmission Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
600

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals