Huawei quidway s7700 - Page 618

Port Protocol :enabled
Port Role :Designated Port
Port Priority :128
Port Cost(Dot1T ) :Config=auto / Active=200000000
Desg. Bridge/Port :32768.00e0-fc9a-4315 / 128.82
Port Edged :Config=disabled / Active=disabled
Point-to-point :Config=auto / Active=true
Transit Limit :147 packets/hello-time
Protection Type :None
Port Stp Mode :MSTP
Port Protocol Type :Config=auto / Active= dot1s
BPDU Encapsulation :Config=stp / Active=stp
PortTimes :Hello 2s MaxAge 20s FwDly 15s RemHop 20
TC or TCN send :0
TC or TCN received :0
BPDU Sent :7171
TCN: 0, Config: 0, RST: 0, MST: 7171
BPDU Received :2
TCN: 0, Config: 0, RST: 0, MST: 2
----End
Configuration Files
l Configuration file of CE1
#
sysname CE1
#
vlan batch 100
#
interface GigabitEthernet1/0/0
port hybrid tagged vlan 100
stp bpdu vlan 100
#
return
l Configuration file of CE2
#
sysname CE2
#
vlan batch 100
#
interface GigabitEthernet1/0/0
port hybrid tagged vlan 100
stp bpdu vlan 100
#
return
l Configuration file of CE3
#
sysname CE3
#
vlan batch 200
#
interface GigabitEthernet1/0/0
port hybrid tagged vlan 200
stp bpdu vlan 200
#
return
l Configuration file of CE4
#
sysname CE4
#
vlan batch 200
#
interface GigabitEthernet1/0/0
port hybrid tagged vlan 200
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 11 Layer 2 Protocol Transparent Transmission Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
601