IAI SEL User Manual

275
17. Gateway Function Associated
275
③
Manual Movement with the servo-motor turned OFF
Current Position
Servo ON
Perform the emergency stop operation of the RC
actuator.
Move the actuator to any position manually.
The status of servo-motor ON/OFF is confirmed in
the Axis Status Display Section (When “S” is
displayed, the servo-motor is turned ON and it is not
displayed, the servo-motor is turned OFF).
DANGER
When the RC actuator is to be moved manually,
make sure that the emergency stop button has
been pressed.

IAI SEL Specifications

General

Protection Class	IP20
Communication	RS-232C
Control Method	PTP
Number of Axes	Up to 4 axes
Vibration Resistance	4.9 m/s² (0.5 G)
Humidity	20 to 85% RH (non-condensing)