IAI SEL User Manual

284
17. Gateway Function Associated
284
When the data is to be written in the flash ROM,
press the (Yes) key and when it is not to be
written, press the (No) key.
When the data is being written in the flash ROM,
the message in the left figure is displayed.
CAUTION :
Never turn OFF the power to the controller
when the data is written into the flash ROM.
When the data writing in the flash ROM is completed,
the completion message is displayed as shown in
the left figure.
When the key is pressed, the RC Edit screen is
returned.

IAI SEL Specifications

General

Protection Class	IP20
Communication	RS-232C
Control Method	PTP
Number of Axes	Up to 4 axes
Vibration Resistance	4.9 m/s² (0.5 G)
Humidity	20 to 85% RH (non-condensing)