Since the program, parameter, and symbol will be read from ash memory at restart time, the data
in memory becomes the original data before editing unless the data is written in ash memory.
The controller always operates according to the data in memory (within the dotted box) excluding
parameters.
Content 1: Parameters excluding content 2 below and encoder parameter
Content 2: Driver card, IO slot card (electric power type card) parameter (X-SEL-K, KX, TT) : IO
slot card (electric power type card) parameter (X-SEL-P/Q, PX/QX, SSEL, ASEL,
PSEL)
Content 3: Flag, Variable, and String
To Next Page
Loading...
