IBM System Storage DS3000 User Manual

Parameter
Parameter Description
cgEnhancedFlashCopyLogicalDrive The name of the consistency group Enhanced FlashCopy
logical drive that you want to delete. Enclose the name
of the consistency group Enhanced FlashCopy logical
drive in double quotation marks (" ") inside square
brackets ([ ]).
deleteRepositoryMembers The parameter to save or delete the member logical
drives. To save the member logical drives, set this
parameter to TRUE. To delete the member logical drives,
set this parameter to FALSE. The default value is TRUE.
Delete Consistency Group Enhanced FlashCopy Image
This command deletes the Enhanced FlashCopy images in a consistency group.
Syntax
delete cgEnhancedFlashCopyImage consistencyGroup="consistencyGroupName"
[(deleteCount=numberOfEnhancedFlashCopyImages |
retainCount=numberOfEnhancedFlashCopyImages) |
ignoreEnhancedFlashCopyLogicalDrive=(TRUE | FALSE)
Parameters
Parameter Description
consistencyGroup The name of the consistency group from which you want
to delete the Enhanced FlashCopy images. Enclose the
consistency group name in double quotation marks (" ").
deleteCount The number of Enhanced FlashCopy images that you
want to delete from the consistency group. Use integer
values.
This parameter deletes the oldest Enhanced FlashCopy
image first and continues to delete the oldest Enhanced
FlashCopy images until reaching the number that you
enter.
retainCount The number of Enhanced FlashCopy images that you
want to keep in the consistency group. Use integer
values.
This parameter keeps the most recent Enhanced
FlashCopy images in the consistency group.
ignoreEnhancedFlashCopyLogicalDrive Use this parameter to make sure that you do not delete
an Enhanced FlashCopy image that has an Enhanced
FlashCopy logical drive associated with the Enhanced
FlashCopy image. You can use one of these values:
v TRUE - Use this value to delete the Enhanced
FlashCopy image even though the Enhanced
FlashCopy image has an associated Enhanced
FlashCopy logical drive.
v FALSE - This value will cause the command to
terminate when the Enhanced FlashCopy image has an
associated Enhanced FlashCopy logical drive.
The default value is TRUE.
3-110 IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide

IBM System Storage DS3000 Specifications

General

Brand	IBM
Model	System Storage DS3000
Category	Storage
Language	English