Logical Drive Commands (For Standard and Thin Logical Drives and
Logical Drives in a Disk pool)
“Check Logical Drive Parity” on page 3-47
“Clear Logical Drive Reservations” on page 3-51
“Clear Logical Drive Unreadable Sectors” on page 3-52
“Create Logical Drive on Disk Pool” on page 3-97
“Create RAID Logical Drive (Automatic Drive Select)” on page 3-87
“Create RAID Logical Drive (Free Extent Based Select)” on page 3-90
“Create RAID Logical Drive (Manual Drive Select)” on page 3-93
“Delete Logical Drive” on page 3-116
“Delete Logical Drive on a Disk Pool” on page 3-117
“Increase Logical Drive Capacity on a Disk Pool” on page 3-137
“Initialize Thin Logical Drive” on page 3-138
“Recover RAID Logical Drive” on page 3-142
“Remove Logical Drive LUN Mapping” on page 3-148
“Repair Logical Drive Parity” on page 3-155
“Set Logical Drive Attributes” on page 3-217
“Set Logical Drive Attributes for a Disk Pool” on page 3-227
“Set Logical Drive Mapping” on page 3-231
“Set Thin Logical Drive Attributes” on page 3-245
“Show Logical Drive” on page 3-264
“Show Logical Drive Action Progress” on page 3-265
“Show Logical Drive Performance Statistics” on page 3-269
“Show Logical Drive Reservations” on page 3-269
“Show Thin Logical Drive” on page 3-280
“Start Logical Drive Initialization” on page 3-302
Repository Logical Drive Analysis Commands
“Check Repository Consistency” on page 3-49
Chapter 3. Script Commands 3-331
To Next Page
Loading...
Need help?
General