Syntax
clear enhancedGlobalMirrorFault(all | enhancedGlobalMirrorGroup
["enhancedGlobalMirrorGroupName"] |
enhancedGlobalMirrorGroups ["enhancedGlobalMirrorGroupName1" ...
"enhancedGlobalMirrorGroupNameN"] |
logicalDrive ["logicalDriveName"] |
logicalDrives ["logicalDriveName1" ... "logicalDriveNameN"])
Parameters
None
Clear Drive Channel Statistics
This command resets the statistics for all of the disk drive channels.
Syntax
clear allDriveChannels stats
Parameters
None.
Clear Logical Drive Reservations
This command clears persistent logical drive reservations.
Syntax
clear (allLogicalDrives | logicaldrive [logicalDriveName]|
logicalDrives [logicalDriveName1 ... logicalDriveNameN]) reservations
Parameters
Parameter Description
allLogicalDrives The setting to clear persistent logical drive reservations
on all of the logical drives in the storage subsystem.
logicalDrive or
logicalDrives
The name of the specific logical drive for which you
want to clear persistent logical drive reservations. You
can enter more than one logical drive name. Enclose the
logical drive name in square brackets ([ ]). If the logical
drive name has special characters, you also must enclose
the logical drive name in double quotation marks (“ ”).
Notes
You can use any combination of alphanumeric characters, hyphens, and underscores for the names.
Names can have a maximum of 30 characters.
Related topics
Naming Conventions
Chapter 3. Script Commands 3-51
To Next Page
Loading...
Need help?
General