DETAILS
Name: 1
Status: Optimal
Capacity: 67.860 GB
Current owner: Controller in slot 0,1
Quality of Service (QoS) Attributes
RAID level: 0
Drive media type: Disk Drive
Drive interface type: Fibre Channel
enclosure loss protection: No
Secure Capable: No
Secure: No
Total logical drives: 7
Standard logical drives: 3
Repository logical drives: 4
Free Capacity: 58.645 GB
Associated drives - present (in piece order)
Total drives present: 1
Enclosure Slot
00
Show Disk Drive
For each disk drive in the storage subsystem, this command returns the following information:
v The total number of disk drives
v The type of disk drive (Fibre Channel, SATA, or SAS)
v Information about the basic disk drive:
– The enclosure location and the slot location
– The status
– The capacity
– The data transfer rate
– The product ID
– The firmware level
v Information about the disk drive channel:
– The enclosure location and the slot location
– The preferred channel
– The redundant channel
v Hot spare coverage
v Details for each disk drive
Depending on the size of your storage subsystem, this information can be several pages long. In addition,
the disk drive information is returned for the show storageSubsystem profile command.
3-256 IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide