IBM System Storage DS3000 User Manual

Syntax
save storageSubsystem performanceStats file=”filename”
Parameter
Parameter Description
file The name of the file to which you want to save the performance statistics. Enclose the
file name in double quotation marks (“ ”). For example:
save storageSubsystem performanceStats
file="C:\Program Files\CLI\reports\stats.csv"
This command does not automatically append a file extension to the saved file. You
can use any file name, but you must specify the .csv extension.
Save Storage Subsystem RLS Counts
This command saves the read link status (RLS) counters to a file.
Syntax
save storageSubsystem RLSCounts file=”filename”
Parameter
Parameter Description
file The name of the file to which you want to save the RLS
counters. Enclose the file name in double quotation marks
(“ ”).
Notes
To more effectively save RLS counters to a file, perform these steps:
1. Run the reset storageSubsystem RLSBaseline command to set all of the RLS counters to 0.
2. Run the storage subsystem for a predetermined amount of time (for instance, two hours).
3. Run the save storageSubsystem RLSCounts file=”filename” command.
Save Storage Subsystem SAS PHY Counts
This command saves the SAS physical layer (SAS PHY) counters to a file. To reset the SAS PHY counters,
run the reset storageSubsystem SASPHYBaseline command.
Syntax
save storageSubsystem SASPHYCounts file="filename"
3-180 IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide

IBM System Storage DS3000 Specifications

General

Brand	IBM
Model	System Storage DS3000
Category	Storage
Language	English