IBM System Storage DS3000 User Manual

“Test Enhanced Global Mirror Group connectivity” on page 3-321
Controller Commands
“Clear Drive Channel Statistics” on page 3-51
“Diagnose Controller” on page 3-119
“Enable Controller Data Transfer” on page 3-131
“Reset Controller” on page 3-158
“Save Controller NVSRAM” on page 3-172
“Set Controller” on page 3-191
“Set Controller Service Action Allowed Indicator” on page 3-194
“Save Disk Drive Channel Fault Isolation Diagnostic Status” on page 3-173
“Set Drive Channel Status” on page 3-198
“Set Host Channel” on page 3-213
“Show Cache Backup Device Diagnostic Status” on page 3-250
“Show Cache Memory Diagnostic Status” on page 3-250
“Show Controller” on page 3-253
“Show Controller Diagnostic Status” on page 3-254
“Show Controller NVSRAM” on page 3-254
“Show Drive Channel Statistics” on page 3-258
“Show Host Interface Card Diagnostic Status” on page 3-263
“Start Cache Backup Device Diagnostic” on page 3-285
“Start Cache Memory Diagnostic” on page 3-287
“Start Storage Subsystem Configuration Database Diagnostic” on page 3-304
“Start Controller Diagnostic” on page 3-289
“Start Controller Trace” on page 3-291
“Start Drive Channel Fault Isolation Diagnostics” on page 3-292
“Start Drive Channel Locate” on page 3-293
“Start Host Interface Card Diagnostic” on page 3-297
“Start iSCSI DHCP Refresh” on page 3-299
3-324 IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide

IBM System Storage DS3000 Specifications

General

Brand	IBM
Model	System Storage DS3000
Category	Storage
Language	English