IBM System Storage DS3000

“Create Host” on page 3-83
“Create Host Group” on page 3-84
“Create Host Port” on page 3-85
“Create iSCSI Initiator” on page 3-86
“Delete Host” on page 3-115
“Delete Host Group” on page 3-115
“Delete Host Port” on page 3-115
“Delete iSCSI Initiator” on page 3-116
“Set Host” on page 3-212
“Set Host Group” on page 3-214
“Set Host Port” on page 3-214
“Set iSCSI Initiator” on page 3-215
“Set iSCSI Target Properties” on page 3-216
“Show Current iSCSI Sessions” on page 3-255
“Show Host Ports” on page 3-264
iSCSI Commands
“Create iSCSI Initiator” on page 3-86
“Delete iSCSI Initiator” on page 3-116
“Reset Storage Subsystem iSCSI Baseline” on page 3-161
“Save Storage Subsystem iSCSI Statistics” on page 3-179
“Set iSCSI Initiator” on page 3-215
“Set iSCSI Target Properties” on page 3-216
“Show Current iSCSI Sessions” on page 3-255
“Show Storage Subsystem Unconfigured iSCSI Initiators” on page 3-281
“Start iSCSI DHCP Refresh” on page 3-299
“Stop Storage Subsystem iSCSI Session” on page 3-314
3-330 IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide