IBM System Storage DS3000 User Manual

Parameter
Parameter Description
logFile The file path and the file name to which you want to
save the log sense data. Enclose the file name in double
quotation marks (" "). For example:
file="C:\Program Files\CLI\logs\lgsendat.txt"
This command does not automatically append a file
extension to the saved file. You must specify a file
extension when entering the file name.
Save Enclosure Log
This command saves the log sense data to a file. Log sense data is maintained by the environmental cards
for each enclosure. Not all of the environmental cards contain log sense data.
Syntax
save allEnclosures logFile="filename"
Parameter
Parameter Description
logFile The file path and the file name to which you want to save
the log sense data. Enclose the file name in double quotation
marks (" "). For example: file="C:\Program
Files\CLI\logs\enclosurelogdat.txt"
This command does not automatically append a file
extension to the saved file. You must specify a file extension
when entering the file name.
Save Storage Subsystem Configuration
This command creates a script file that you can use to create the current storage subsystem logical drive
configuration.
Syntax
save storageSubsystem configuration file=”filename”
[(allconfig | globalSettings=(TRUE | FALSE)
logicalDriveConfigAndSettings=(TRUE | FALSE)
hostTopology=(TRUE | FALSE)
lunMappings=(TRUE | FALSE))]
Parameters
Parameter Description
file The name of the file that contains the
configuration values. Enclose the file name in
double quotation marks (“ ”).
allConfig The setting to save all of the configuration values
to the file. (If you choose this parameter, all of the
configuration parameters are set to TRUE.)
3-174 IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide

IBM System Storage DS3000 Specifications

General

Brand	IBM
Model	System Storage DS3000
Category	Storage
Language	English