IBM System Storage DS3000 User Manual

Syntax
set enhancedFlashCopyGroup ["
enhancedFlashCopyGroupName"] mediaScanEnabled=(TRUE | FALSE) redundancyCheckEnabled=(TRUE | FALSE)
Parameters
Parameter Description
enhancedFlashCopyGroup The alphanumeric identifier (including - and _) of the
Enhanced FlashCopy group on which you want to run a
media scan. Enclose the Enhanced FlashCopy group
name in double quotation marks (" ") inside of square
brackets ([ ]).
mediaScanEnabled The setting to turn on or turn off media scan for the
logical drive. To turn on media scan, set this parameter
to TRUE. To turn off media scan, set this parameter to
FALSE. (If media scan is disabled at the storage subsystem
level, this parameter has no effect.)
redundancyCheckEnabled The setting to turn on or turn off redundancy checking
during a media scan. To turn on redundancy checking,
set this parameter to TRUE. To turn off redundancy
checking, set this parameter to FALSE.
Set Enhanced FlashCopy Group Schedule
This command defines the schedule for taking Enhanced FlashCopy images for an Enhanced FlashCopy
group.
Syntax
set enhancedFlashCopyGroup ["
enhancedFlashCopyGroupName"] enableSchedule=(TRUE | FALSE) schedule=(immediate | flashcopySchedule)
Parameters
Parameter Description
enhancedFlashCopyGroup The name of the Enhanced FlashCopy group for which
you are setting properties. Enclose the Enhanced
FlashCopy group name in double quotation marks (" ")
inside of square brackets ([ ]).
enableSchedule Use this parameter to turn on or to turn off the ability to
schedule an Enhanced FlashCopy operation. To turn on
Enhanced FlashCopy scheduling, set this parameter to
TRUE. To turn off Enhanced FlashCopy scheduling, set this
parameter to FALSE.
Chapter 3. Script Commands 3-205

IBM System Storage DS3000 Specifications

General

Brand	IBM
Model	System Storage DS3000
Category	Storage
Language	English