HOST TYPE ADT STATUS
ASSOCIATED INDEX
AIX Disabled 6
AIX-ADT/AVT Enabled 4
DEFAULT Disabled 0
HP-UX Enabled 7
HPXTPGS Disabled 17
IBM TS SAN VCE Enabled 12
Irix Disabled 10
LNXCLVMWARE Disabled 13
Linux Enabled 5
Mac OS X Enabled 1
Netware Failover Enabled 11
Solaris (with Veritas DMP) Enabled 14
Solaris (with or without MPXIO) Disabled 8
Windows 2000/Server 2003/Server 2008 Clustered Disabled 3
Windows 2000/Server 2003/Server 2008 Clustered
(supports DMP) Enabled 15
Windows 2000/Server 2003/Server 2008 Non-Clustered Disabled 2
(Default)
Windows 2000/Server 2003/Server 2008 Non-Clustered
(supports DMP) Enabled 9
Show Controller NVSRAM
The show controller NVSRAM command returns a table of values in the controller NVSRAM that is similar
to that shown in this example. With the information from the table, you can modify the contents of the
NVSRAM by using the set controller command. This example shows information for a controller in
slot A in a controller module. You can produce a similar table for a controller in slot B, or you can
produce a table for both controllers.
Attention: Incorrectly setting the NVSRAM can severely affect the performance and the availability of
the subsystems. You should only modify the NVSRAM settings according to the latest information
documented for your configuration in DS4000 publications, readmes, or by your IBM support
representative.
Controller "a":
Region 226:
0000: 4942 4d20 2020 2020 3138 3138 2020 2020 IBM.....1818....
0010: 2020 2020 2020 2020 3037 3330 0000 0000 ........0730....
0020: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0030: 0000 0008 5600 0000 0000 0000 0000 0000 ....V...........
Region 232:
0000: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0010: 5500 0000 0000 0000 0000 0000 0000 0000 U...............
Region 233:
Chapter 12. Examples of Information Returned by the Show Commands 12-41
To Next Page
Loading...
Need help?
General