IBM System Storage DS3000

World-wide identifier: 20:00:00:a0:b8:41:20:c8:00:00:00:00:00:00:00:00
Associated subsystem: Sata_R1
Port Channel ID
0 5 8/0xD9
1 3 8/0xD9
Security Capable: No
Secure: No
Read/write accessible: Yes
Security key identifier: Not Applicable
Speed: 7,200 RPM
Current data rate: 4 Gbps
Product ID: ST3750330NS 43W9715 42C0417IBM
Package version: BB10
Firmware version: BB10
Serial number: 5QK04MDK
Vendor: Not Available
Date of manufacture: Not Available
ATA Translator
Product ID: BR-2401-3.0
Vendor: SLI
Firmware Version: LP1158
Location: Individual Drive Controller
Show Drive Channel Status
The show drive channel stat command returns information about the drive channels in a storage
subsystem. Use this information to determine how well the channels are running and errors that might be
occurring on the channels.
DRIVE CHANNELS----------------------------
SUMMARY
CHANNEL PORT STATUS CTRL A LINK CTRL B LINK
1 8,7 Optimal Up Up
2 6,5 Optimal Up Up
3 4,3,Out Optimal Up Up
4 2,1,Out Optimal Up Up
5 1,2,Out Optimal Up Up
6 3,4,Out Optimal Up Up
7 5,6 Optimal Up Up
8 7,8 Optimal Up Up
DETAILS
DRIVE CHANNEL 1
Port: 8, 7
Status: Optimal
Max. Rate: 4 Gbps
Current Rate: 4 Gbps
Rate Control: Auto
Controller A link status: Up
Controller B link status: Up
DRIVE COUNTS
Total # of attached drives: 0
Chapter 12. Examples of Information Returned by the Show Commands 12-49