IBM System Storage DS3000 User Manual

Show Enhanced FlashCopy Logical Drives
This command returns information about one or more Enhanced FlashCopy logical drives.
Syntax
show (allEnhancedFlashCopyLogicalDrives | enhancedFlashCopyLogicalDrive
[enhancedFlashCopyLogicalDriveName] |
enhancedFlashCopyLogicalDrives
[enhancedFlashCopyLogicalDriveName1 ... enhancedFlashCopyLogicalDriveNamen])
[summary]
Parameters
Parameter Description
allEnhancedFlashCopyLogicalDrives The parameter to return information about all of the
Enhanced FlashCopy logical drives in the storage
subsystem.
enhancedFlashCopyLogicalDrive or
enhancedFlashCopyLogicalDrives
The name of a specific Enhanced FlashCopy logical drive
about which you are retrieving information. Enclose the
Enhanced FlashCopy logical drive name in square
brackets ([ ]).
When you enter more than one Enhanced FlashCopy
logical drive name, separate the names with a space.
Enclose all of the names in only one set of square
brackets ([ ]).
summary The parameter to return a concise list of information
about the Enhanced FlashCopy logical drives.
Notes
You can use any combination of alphanumeric characters, underscore (_), hyphen (-), and pound (#) for
the names. Names can have a maximum of 30 characters.
This command returns Enhanced FlashCopy logical drive information as shown in this example:
FLASHCOPY LOGICALDRIVE(FLASHCOPY-IMAGE BASED) SUMMARY
SUMMARY
Total Enhanced FlashCopy Logical drives: 1
Most Recent Enhanced FlashCopy Logical drive: Day month date hh:mm:ss yyyy
Status: 1 Optimal, 0 Non Optimal
Name Type Status Capacity Associated Base Logical drive
2_SV_0001 Standard Optimal 3.000 GB 2
Enhanced FlashCopy Logical drive Timestamp Enhanced FlashCopy Image Timestamp Mode
1/23/12 6:44:31 PM IST 1/23/12 6:27:36 PM IST Read Write
Total Repository Capacity Available Repository Capacity
1.199 GB 0.125 MB (0%)
The size of your monitor determines how the information wraps and will affect how the information
appears.
Show Enhanced Remote Mirroring Logical Drive Candidates
This command returns information about the candidate logical drives on a remote storage subsystem that
you can use as secondary logical drives in a Enhanced Remote Mirroring configuration.
3-262 IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide

IBM System Storage DS3000 Specifications

General

Brand	IBM
Model	System Storage DS3000
Category	Storage
Language	English