Standby: 2
In use: 0
Full Disk Encryption: Enabled
Security key identifier: 27000000600A0B800029ECE60000DE9E4940E373
Number of drive enclosures: 2
Number of drive enclosures allowed: 28
Storage Partitioning: Enabled
Number of partitions used: 2
Number of partitions allowed: 2
Number of logical drives allowed per partition: 256
Access logical drive: LUN 31,31,31 (see Mappings section for details)
Default host OS: Windows 2000/Server 2003/Server 2008 Non-Clustered
(Host OS index 2)
Current configuration
Firmware version: 07.50.00.00
NVSRAM version: N1818D53R1050V03
EMW version: 10.50.G5.02
AMW version: 10.50.G5.02
Pending configuration
Staged firmware download supported: Yes
Firmware version: None
NVSRAM version: None
Transferred on: None
Controller enclosure audible alarm: Disabled
NVSRAM configured for batteries: Yes
Start cache flushing at (in percentage): 80
Stop cache flushing at (in percentage): 80
Cache block size (in KB): 8
Media scan frequency (in days): 1
Failover alert delay (in minutes): 5
Feature enable identifier: 303030323420303035353420493FECB1
Feature pack: DS5300
Feature pack submodel ID: 93
Storage Subsystem world-wide identifier (ID): 600A0B800029ECE600000000493FECAB
CONTROLLERS------------------------------
Number of controllers: 2
Controller in Enclosure 85, Slot A
Status: Online
Current configuration
Firmware version: 07.50.00.00
Appware version: 07.50.00.00
Bootware version: 07.50.00.00
NVSRAM version: N1818D53R1050V03
Pending configuration
Firmware version: None
Chapter 4. Configuring a Storage Subsystem 4-19
To Next Page
Loading...
Need help?
General