Logical Drive status: Optimal
Capacity: 410.0 GB
Logical Drive ID: 60:0a:0b:80:00:29:ec:e6:00:00:df:13:49:41:13:4f
Subsystem ID (SSID): 5
Associated subsystem: FDE_R6
RAID level: 6
Secure: Yes
Drive type: Fibre Channel/Full Disk Encryption(FDE)
Enclosure loss protection: No
Preferred owner: Controller in slot B
Current owner: Controller in slot B
Segment size: 128 KB
Capacity reserved for future segment size changes: Yes
Maximum future segment size: 2,048 KB
Modification priority: High
Read cache: Enabled
Write cache: Enabled
Write cache without batteries: Disabled
Write cache with mirroring: Enabled
Flush write cache after (in seconds): 10.00
Dynamic cache read prefetch: Enabled
Enable background media scan: Enabled
Media scan with redundancy check: Enabled
Pre-Read redundancy check: Disabled
Logical Drive name: Sata_Raid6_A
Logical Drive status: Optimal
Capacity: 1,000.0 GB
Logical Drive ID: 60:0a:0b:80:00:29:ed:8a:00:00:cc:90:49:3f:f7:b5
Subsystem ID (SSID): 0
Associated subsystem: Sata_Raid6
RAID level: 6
Secure: No
Drive type: Serial ATA (SATA)
Enclosure loss protection: No
Preferred owner: Controller in slot A
Current owner: Controller in slot A
Segment size: 128 KB
Capacity reserved for future segment size changes: Yes
Maximum future segment size: 2,048 KB
Modification priority: High
Read cache: Enabled
Write cache: Enabled
Write cache without batteries: Disabled
Write cache with mirroring: Enabled
Flush write cache after (in seconds): 10.00
Dynamic cache read prefetch: Enabled
Chapter 12. Examples of Information Returned by the Show Commands 12-19
To Next Page
Loading...
Need help?
General