Dynamic cache read prefetch: Enabled
Enable background media scan: Disabled
Media scan with redundancy check: Disabled
Pre-Read redundancy check: Disabled
Volume name: 3
Volume status: Optimal
Capacity: 10.00 GB
Volume world-wide identifier: 60:0a:0b:80:00:29:ed:12:00:00
Subsystem ID (SSID): 16
Associated Array: Volume-Group-2
RAID level: 1
LUN: 15
Accessible By: Default Group
Media type: Hard Disk Drive
Interface type: Fibre Channel
Enclosure loss protection: Yes
Secure: No
Preferred owner: Controller in slot A
Current owner: Controller in slot A
Segment size: 128 KB
Capacity reserved for future
segment size changes: Yes
Maximum future segment size: 2,048 KB
Modification priority: High
Read cache: Enabled
Write cache: Enabled
Write cache without batteries: Disabled
Write cache with mirroring: Enabled
Flush write cache after
(in seconds): 10.00
Dynamic cache read prefetch: Enabled
Enable background media scan: Disabled
Media scan with redundancy check:Disabled
Pre-Read redundancy check: Disabled
Volume name: 4
Volume status: Optimal
Capacity: 3.000 GB
Volume world-wide identifier: 60:0a:0b:80:00:29:ed:12:00:00
Subsystem ID (SSID): 17
Associated Array: Volume-Group-2
RAID level: 1
LUN: 16
Accessible By: Default Group
Media type: Hard Disk Drive
Interface type: Fibre Channel
Appendix A: Examples of Information Returned by the Show Commands 225
Enclosure loss protection: Yes
Secure: No
Preferred owner: Controller in slot B
Current owner: Controller in slot B
Segment size: 128 KB
Capacity reserved for future
segment size changes: Yes
Maximum future segment size: 2,048 KB
Modification priority: High
Read cache: Enabled
Write cache: Enabled
Write cache without batteries: Disabled
Write cache with mirroring: Enabled
Flush write cache after
(in seconds): 10.00
Dynamic cache read prefetch: Enabled
Enable background media scan: Disabled
Media scan with redundancy check: Disabled
Pre-Read redundancy check: Disabled
Volume name: Unamed
Volume status: Optimal
A-18 IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide