IBM System Storage DS3000

Note: For version 7.60.xx.xx, you can change the drive parameter to accommodate the enclosures
with internal disk drawers.
Revive Enhanced FlashCopy Group
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Revive Enhanced FlashCopy Logical Drive
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Save Controller NVSRAM
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Save Drive Channel Fault Isolation Diagnostic Status
DS3000: Not supported
DS4000: Not supported
DS5000: 7.3x.xx.xx
Save Drive Log
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Save Enclosure Log
DS3000: 7.35.xx.xx
DS4000: 6.60.xx.xx
DS5000: 7.xx.xx.xx
Save Storage Subsystem Configuration
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Save Storage Subsystem Diagnostic Data Capture
DS3000: 7.35.xx.xx
DS4000: 6.6x.xx.xx
DS5000: 7.3x.xx.xx
Save Storage Subsystem DBM Database
DS3000: 7.77.xx.xx
DS4000: N/A
DS5000: 7.77.xx.xx
Save Storage Subsystem Diagnostic Data
DS3000: 6.17.xx.xx
DS4000: 6.16.xx.xx
Chapter 3. Script Commands 3-17