IBM System Storage DS3000

DS5000: 7.3x.xx.xx
Set read-only to a Read/Write Enhanced FlashCopy Logical Drive
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Set Remote Mirror
DS3000: 7.7x.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Set Session
DS3000: 6.17.xx.xx
DS4000: 5.2x.xx.xx
DS5000: 7.3x.xx.xx
Set Storage Subsystem
DS3000: 6.17.xx.xx
DS4000: 5.2x.xx.xx
DS5000: 7.3x.xx.xx
Note:
v 5.4x.xx.xx adds the failoverAlertDelay parameter.
v 6.1x.xx.xx adds the alarm parameter.
Set Storage Subsystem Enclosure Positions
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Note: For 6.14.xx.xx and 6.16.xx.xx, controller is not a valid value.
Set Storage Subsystem ICMP Response
DS3000: 6.50.xx.xx (DS3300 only)
DS4000: 7.1x.xx.xx
DS5000: 7.3x.xx.xx
Set Storage Subsystem iSNS Server IPv4 Address
DS3000: 6.50.xx.xx
DS4000: N/A
DS5000: 7.6x.xx.xx
Set Storage Subsystem iSNS Server IPv6 Address
DS3000: 6.50.xx.xx
DS4000: N/A
DS5000: 7.6x.xx.xx
Set Storage Subsystem iSNS Server Listening Port
DS3000: 6.50.xx.xx
DS4000: N/A
Chapter 3. Script Commands 3-23