1 Project Transfer Function
29-2 WindO/I-NV4 User’s Manual
1.2 Project Transfer Procedures
The following methods can be used to upload or download project between the MICRO/I and an external memory
device inserted in the MICRO/I.
• Using the USB Autorun function
For details, refer to Chapter 31 “2 USB Autorun Function” on page 31-22.
• Using Key Buttons, Multi-Buttons, or Multi-Commands
For details, refer to “1.4 Using Key Buttons, Multi-Buttons, or Multi-Commands to Transfer Project Data” on
page 29-6.
• Using the File Manager in the System Mode on the MICRO/I
*1
For details, refer to “1.5 Using File Manager on the MICRO/I to Transfer Project Data” on page 29-7.
*1 HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F only
To Next Page
Loading...