CEAST 9340 - Instructions for Use and Maintenance 7510.000MN1r ed. 1 rev. 1 - Page 93
X
d) Remove the screw F and remove the
adapter A from the force sensor.
ASSEMBLY
X
Exagonal key
A
F
Piezoelectric
force sensor
a) Choose the set of gripping adapters to
be installed on the vice according to
the specimen type and thickness (see
Fig. 1, para. 8.7.4 and Appendix G).
b) Fasten the adapter A to the force sen-
sor using the screw F.
The adapter surface must be visually
aligned with the upper part of the fixed
height vice support stand.
X
X
c) Insert the plate B in the adapter A
checking that the knurled surface is
turned toward the arrow.
A
B
Exagonal key
A
F
Piezoelectric
force sensor
To Next Page
Loading...
