Need help?Do you have a question about the IPCGansow CT 230 BT 85 and is the answer not in the manual?
General| Working width | 850 mm |
|---|---|
| Vacuum motor power | 550 W |
| Traction | Automatic |
| Battery capacity | 525 Ah |
| Brush Width | 850 mm |
| Charging Time | 8-10 hours |
Details voltage, battery capacity, running time, and indicators.
Specifies width, brush diameter, and adjustment type.
Indicates cleaning capacity in m²/h for different models.
Describes material and connection types for brushes.
Lists capacity, material, filter type, and water flow adjustment.
Details capacity, material, and discharge hose specifications.
Specifies motor power, stage, max air flow, and motor position.
Outlines shape, main body material, blade material, and replacement method.
Covers system, speed, adjustment, and motor power.
Details type, diameter, material, parking brake, and steering radius.
Describes material, thickness, paint treatment, length, width, and height.
Details the weight with/without batteries and noise level.
Covers protection, emergency switch features, and vibration levels.
Mentions European CE certification.
Steps for filling detergent and chem-dose tanks.
Procedures for attaching brushes and selecting cleaning programs.
Guidance on machine movement, speed, and post-cleaning steps.
Steps for emptying and cleaning water tanks and filters.
Instructions for cleaning brushes and checking squeegee condition.
Procedure for verifying the battery charge level.
Diagnosing problems when the machine does not start.
Addressing issues related to the suction motor.
Resolving problems causing the floor to remain wet.
Solutions for when the machine leaves the floor dirty.
Details programming the electronic control board for machine functions.
Guides on how to program user settings and parameters.
Procedures for checking current draw of brush motors and actuators.
Steps for disassembling the brush head, motors, and brushes.
Steps for cleaning, checking, and replacing the solenoid valve.
Procedures for checking suction motor current draw.
Covers squeegee and actuator assembly checks.
Procedures for checking float switch operation.
Details on checking and replacing the drive motor wheel.
Covers checking and replacing the accelerator pedal.
Instructions for replacing or regulating the steering sensor.
Details on the control panel board and its wiring.
Information on the functions circuit board.
Reference to the wiring diagram.
Lists and explains error codes for the machine.
Provides general troubleshooting guidance.
To Next Page
