PLDC01938
REVISION 00
01/06/2011
TECHNICAL DEPT.
Stavale
- date 05/09/2011
45/195
A3.1 Disassembling the brush head
Disassembly
1
Go to the tank draining area and empty both tanks.
2
Move the machine onto a flat dry area of floor.
3
Follow the procedure to remove the electromechanical actuator as described in paragraph A2.3 up to point
15.
4
Turn the lever of the water tap A anticlockwise to prevent the outflow of water.
5
Disconnect the two brush motors from the main system by means of the Anderson connectors B1 and B2.
6
Disconnect the solenoid valve C by means of the connector C1.
7
Remove the detergent input hose D from the solenoid valve C by unscrewing the hose clip D1.
8
Remove the plastic tie fastening the brush motor wires to the main wiring and the tie fastening the brake
wires to the front shock absorber F.
B1
B2
C
C1
PHOTO 99
PHOTO 101
D
D
D1
D1
PHOTO 100
C
To Next Page
Loading...
