PLDC01938
REVISION 00
01/06/2011
TECHNICAL DEPT.
Stavale
- date 05/09/2011
21/195
A2 HEAD ACTUATOR CURRENT DRAW - REPLACEMENT
The head is raised and lowered by means of an electromechanical actuator. Controlled from
the control panel board, as well as positioning the head (washing or standby), the actuator also
regulates the head to the pressure set by the operator on the control board. When replacing, it
is very important that the characteristics given on the old actuator board are respected.
PHOTO 46
i
To Next Page
Loading...
