EasyManua.ls Logo

IPCGansow CT 230 BT 85 - Output Water Filter

IPCGansow CT 230 BT 85
206 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PLDC01938
REVISION 00
01/06/2011
TECHNICAL DEPT.
Stavale
- date 05/09/2011
110/195
Output water filter
When cleaning or replacing the output water filter, always remember to shut off the water
flow by means of the tap. You are recommended to clean the detergent filter frequently.
1
Move the machine onto a flat dry area of floor.
2
Switch the machine off by turning the ignition key A to "0" and press the pedal B to put the parking brake on.
3
Unscrew the knob C and lift both tanks (not indispensable) to access the tap and filter.
4
Near the right back wheel, identify the position of the tap D and clean water filter E.
5
Turn the lever D1 of the tap D through 90° (degrees) to shut off the flow of water to the filter E.
PHOTO 237
C
A
B
D
E1
PHOTO 238
E2
PHOTO 239
D1
D1
D D

Table of Contents

Related product manuals