PLDC01938
REVISION 00
01/06/2011
TECHNICAL DEPT.
Stavale
- date 05/09/2011
83/195
B2 SQUEEGEE AND ACTUATOR ASSEMBLY
The squeegee assembly is raised and lowered by means of an electromechanical actuator
controlled and powered directly from the control panel board. When the suction motor button on
the control panel is pressed, the actuator positions the squeegee and controls operation of the
suction motor by means of the micro switch in the actuator itself. When replacing, it is very
important that the characteristics given on the actuator board being replaced are respected,
unless otherwise indicated.
PHOTO 179
i
To Next Page
Loading...
