8
8 – 44
8.5
8.5.6 Maintenance Menu
The maintenance menu is used only by our service personnel during installation. Users are requested not to
change the setting (bold faced items).
Maintenance Menu
MAINTENANCE MENU
Press an item number key.
0. PREVIOUS MENU
1. ANTENNA HEIGHT UP to 5M 5–10M 10–20M MORE 20M
2.
3. ANTENNA SWITCH TRANSFER DISCARD
4. PARTIAL MASTER RESET
5. ALL MASTER RESET
6. INTERNAL SETTING to CARD 2
7. CARD 2 to INTERNAL SETTING
8. MEMORIZE USER SETTING
9. RESTORE USER SETTING
To close this menu, Press (SUB MENU) key.
8.5.6.1 Antenna Switch
"DISCARD" is set on regular shipment.
Transmission can be enabled while the rotation of the scanner unit is stopped.
Procedures
1. Press the
SUB
MENU
key to open the SUB MENU.
2. Press the
9
key four times to open the INIT SET #4 menu.
3. Press the
1
key to open the MAINTENANCE MENU.
4. Press the
3
key to select "ANTENNA SWITCH".
5. Press the
3
key to select "TRANSFER" or "DISCARD".
When "TRANSFER" is selected, transmission is enabled while the rotation of the
scanner unit is stopped.
6. Press the
ENT
key to confirm the setting.
Exit
To Next Page
Loading...
Need help?
General
