JRC JMA-7710-6 - Turning Alarm Sound on off

3
3 – 52
3.3
3.3.23.10 Turning Alarm Sound On ／ Off
This function is used to whether to turn the alarm sound on or off against danger targets.
The sound is turned on at the default setting.
Setting it at "OFF" does not cause the sound to go off although the alarm detecting function remains
turned on.
Procedures
Procedures
1. Press the
SUB
MENU
key to open the SUB MENU.
2. Press the
3
key to open the RADAR #3 menu.
3. Press the
3
key to open the EPA menu.
4. Press the
4
key to select "AUDIBLE WARNING".
5. Press the
4
key to select "OFF" or "ON".
6. Press the
ENT
key to confirm the setting.
Exit
Exit
7. Press the
SUB
MENU
key.
EPA
1. VECTOR TIME 6MIN (0-60 MIN)
2. PLOT NUMBER OFF
ON
3. LIMITS CPA 1NM (0.1-9.9 NM. )
TCPA 15MIN (1-99 MIN)
4. AUDIBLE WARNING OFF
ON
5. DISPLAY OF CPA RING OFF
ON
Attention
EPA 0. PREV