JRC JMA-7710-6 User Manual

3
3 – 34
3.3
3.3.17 Setting Cross Cursor Length and Fixing Cursor Position
This function is used to set the length of the cross cursor or to select the mode for fixing the cursor.
To set the length of the cross cursor
Procedures
Procedures
1. Press the
SUB
MENU
to open the SUB MENU.
2. Press the
2
key to open the RADAR #2 menu.
3. Press the
5
key to open the CURSOR menu.
4. Press the
1
key to select "CURSOR LENGTH".
5. Press the
1
key to select "SHORT" or "LONG".
6. Press the
ENT
key to confirm the setting.
Exit
Exit
7. Press the
SUB
MENU
key.
Cursor
1. CURSOR LENGTH SHORT LONG
2. FIXED CURSOR
X/Y AXIS X AXIS Y AXIS
CURSOR 0. PREV

JRC JMA-7710-6 Specifications

General

Brand	JRC
Model	JMA-7710-6
Category	Marine Radar
Language	English