3
3 – 54
3.3
3.3.24 Displaying Date and Time
The date and time can be displayed only when the GPS is connected.
The date and time can not be displayed when the radar mode is selected.
Procedures
1. Press the
SUB
MENU
key to open the SUB MENU.
2. Press the
9
key three times to open the INIT SET #3 menu.
3. Press the
5
key to select "DATE ／ TIME".
4. Press the
5
key to select "OFF", "UTC" or "LOCAL" and press the
ENT
key.
The date and time are displayed on the center bottom of the screen.
Exit
5. Press the
SUB
MENU
key.
Init set #3
1. SHIFT COAST LINE #1 SETTING DELETE
2. SHIFT COAST LINE #2 N 0.000’
E 0.000’
3. LAT ／ LON CORRECTION N 0.000’
E 0.000’
4. CHART CENTER POSITION N 0˚ 00.000’
E 0˚ 00.000’
5. DATE ／ TIME
OFF UTC LOCAL
6.
INIT
SET #3
0. PREV
9. NEXT
To Next Page
Loading...
Need help?
General
