JRC JMA-7710-6 - Various Setting; Setting Own Ship Speed Equipment

8
8 – 26
8.5
8.5.3 Various Setting
8.5.3.1 Setting Own Ship Speed Equipment
This function is used to select the equipment for inputting the own ship course.
The selection should be made in accoradance with section “3.2 Preparation”.
Procedures
1. Press the
SUB
MENU
key to open the SUB MENU.
2. Press the
9
key to open the INIT SET #1 menu.
3. Press the
2
key to select "SPEED EQUIPMENT".
4. Press the
2
key to select "MANUAL", "LOG", "GPS", "2AXIS/WT" or
"2AXIS/BT".
5. Press the
ENT
key to confirm the setting.
Exit
6. Press the
SUB
MENU
key.
Init set #1
1.
2. SPEED EQUIPMENT MANUAL
LOG GPS 2AXIS/WT 2AXIS/BT
3. MANUAL SPEED 0.0KT
4. FUNCTION MENU
5. BUZZER VOLUME OFF LOW
MIDDLE HIGH
6. DRIFT SET 0.0°
DRIFT 0.0KT
7.
8.
INIT
SET #1
0. PREV
9. NEXT