3
3 – 28
3.3
3.3.13 Using Alarm [ALARM]
In this section the alarm function is explained as the optional ATA unit is not installed.
Guard zones can be set in order to watch out entries of other ships or targets into the Guard zones.
To set radar alarm function
Specify whether to use the function for outputting an alarm using the set Guard zone or not.
Procedures
1. Press the
GZ
MENU
key to open RADAR ALARM menu.
2. Press the
1
key to select "FUNCTION".
3. Press the
1
key to select "OFF" or "RADAR ALARM".
4. Press the
ENT
key to confirm the setting.
Exit
5. Press the
GZ
MENU
key.
RADAR ALARM
1. FUNCTION OFF RADAR ALARM
2. RADAR ALARM MODE
IN OUT
3. RADAR SECTOR ZONE
4. RADAR SENSITIVITY LEVEL 1 2 34
5. AUDIBLE RADAR ALARM OFF
ON
RADAR
ALARM
To Next Page
Loading...
