5
5.1 Initialization ··························································5-2
5.2 Display Mode ·······················································5-8
5.3 Target Acquisition ···············································5-9
5.4 Displaying the ATA Data ···································5-11
5.5 Data Reading ······················································5-18
5.6 Alarm Display ·····················································5-20
5.7 Erasing an Unnecessary Target ·······················5-23
5.8 Adjusting Intensity ············································5-24
5.9 Function Check ··················································5-25
5.10 Target Past Track ··············································5-31
5.11 Turning ON and OFF the ATA Display ·············5-40
5.12 Turning On and OFF the Alarm Sound of
Dangerous and Lost Targets ····························5-41
5.13 Simulation (Checking the ATA according
to a PseudoTarget) ············································5-42
OPERATIONS
OF ATA
(OPTION)
To Next Page
Loading...
Need help?
General
