JRC JMA-7710-6 User Manual

5.10
5 – 33
5.10.3 Setting Target Past Track Color
This setting is valid when target past track function is ON.
Seven colors (white, sky, blue, green, yellow, pink, and red) are used to specify individual target past
tracks (duplicate colors allowed).
If all colors are specified, the color that is individually set to target past track numbers 0 to 9 is
invalidated.
Procedures
Procedures
1. Press the
SUB
MENU
key to open the SUB MENU.
2. Press the
7
key to open the ATA TRACK menu.
3. Press the
2
key to select "TRACK COLOR".
4. Press the
2
key to select target past track number.
5. Turn the [COLOR] control to select a color.
6. Press the
ENT
key to fix this setting.
The color of target past track with the specified target past track number is switched to
a new setting.
Exit
Exit
7. Press the
SUB
MENU
key to close the ATA TRACK menu.
ATA TRACK
1. TRACK FUNCTION OFF ON
2. TRACK COLOR
ALL0123456789OTHER
WHT SKY BLU GRN YEL PNK RED WHT WHT WHT WHT
3.
4. TRK DISPLAY
ALL0123456789OTHER
5. TRK MEM INTERVAL OFF 10SEC 30SEC
1MIN 3MIN 5MIN 10MIN
Attention
ATA TRACK 0. PREV
9. NEXT

JRC JMA-7710-6 Specifications

General

Brand	JRC
Model	JMA-7710-6
Category	Marine Radar
Language	English