JRC JMA-7710-6 - Adjusting Position by Fixing Own Ship at Screen Center

8
8 – 52
8.5
8.5.7.4 Adjusting Position by Fixing Own Ship at Screen Center
Procedures
Procedures
1. Follow procedures 1 and 2 in subsection 8.5.7.1 to open the INIT SET #3
menu.
2. Press the
4
key to select "CHART CENTER POSITION".
3. Press the
4
key or
ENT
key, enter an center position value for N
(north latitude)/S (South latitude) using numeric keys (
0
to
9
)
and press the
ENT
key.
4. Enter an center position value for E (east longitude) W (west longitude)
using numeric keys (
0
to
9
) and press the
ENT
key.
The data input from the GPS, if any, is prioritized.
Exit
Exit
5. Press the
SUB
MENU
key.
Note
● Use this function can be used only when the plotter mode is selected.
Init set #3
1. SHIFT COAST LINE #1 SETTING DELETE
2. SHIFT COAST LINE #2 N 0.000’
E 0.000’
3. LAT ／ LON CORRECTION N 0.000’
E 0.000’
4. CHART CENTER POSITION N 0˚ 00.000’
E 0˚ 00.000’
5. DATE ／ TIME
OFF UTC LOCAL
6.
INIT
SET #3
0. PREV
9. NEXT