JRC JMA-7710-6 - Using Parallel Index Line

3 – 19
3.3
3.3.6 Using Parallel Index Line
The parallel index line is displayed in half area of radar display.
Procedures
Procedures
1. Press the
SUB
MENU
key to open the SUB MENU.
2. Press the
2
key to open the RADAR #2 menu.
3. Press the
3
key to select "PARALLEL INDEX LINE".
4. Press the
3
key to select "ON" and press the
ENT
key.
The parallel lines appear on the screen (EBL2 changes to them).
Exit
Exit
5. Press the
SUB
MENU
key.
Cancellation
Press the
3
key in "PARALLEL INDEX LINE" (procedure 4) to select
"OFF" and press the
ENT
key.
The parallel lines disappear and change to EBL2.
Radar #2
1. GYRO XXX.X°
2. EBL BEARING
TRUE RELATIVE
3. PARALLEL INDEX LINE
OFF ON
4.
5. CURSOR MENU
6. STERN FLASH
OFF ON
7. KM ／ NM VRM1 KM
NM
8. KM ／ NM VRM2 KM
NM
RADAR #2 0. PREV